ELTEX SBC-1000 - Page 69

SBC session border controllers 69
Parameters for saving CDR records
– Enable CDR — when checked the gateway will generate CDR records;
CDR files settings
– Create files — select CDR file creation mode:
 periodically — CDR file is created after a specified period of time since the device was booted.
 once per day — CDR file is created once a day at a specified time;
 once per hour — CDR file is created once an hour at a specified time;
– Saving period: Days, Hours, Minutes — period of CDR records formation; during this period CDR-records
are stored in the main memory, after that they are saved to the local storage source;