SBC session border controllers 75
Front-ports
— external front port configuration
This setting is only available for tagged VLAN interfaces (the «Type» parameter is set to «Tagged»).
Default VLAN ID — when a packet without VLAN ID tag comes to the port, this packet will be tagged with
VLAN ID tag of the selected network interface, if the packet is received with VLAN ID tag, this tag remains
unchanged;
Egress mode — VLAN tag operation rules during packet transfer from the port:
tagged — send packet with the selected interface VLAN ID;
untagged — send packet without VLAN ID.
Network subsystem –> Network interfaces –> «Add»
(window when selecting the «VPN/pptp client» type)
If you select VPN/pptp client in the «Type» field, special settings will become available:
Network label — network name;
Firewall profile — show the selected firewall profile
for the current interface;
Type — VPN/pptp client;
Enable — enable VPN/PPP interface;
PPTPD IP — PPTP server IP address;
Username — username (login) used by the device
for the network connection;
Password — VPN connection password.
Options:
Ignore default gateway — ignore the gateway
setting in the «Network parameters» section;
Enable MPPE (encryption) — enable encryption.
Services — configuration menu for services enabled the
current interface:
Enable Web — enables access to configurator
through the interface;
Enable Telnet — enables access via telnet protocol
through the interface;
Enable SSH — enables access via ssh protocol through the interface;
Enable SNMP — enables SNMP utilization through the interface.
Only for SBC-2000
To Next Page
Loading...