ELTEX TAU-4.IP - Page 108

108 VoIP Subscriber Gateways
- Group name – identification group name;
- Phone – phone number assigned to the group;
- Ports in group – list of the device port included in the call group;
- Registration – when registration on SIP server is successful, this field displays
registration time. If registration is failed, the field will display ‘Not registered’ record;
- Registrar address – address of SIP server where call group is registered.
Serial group status – shows registration status of configured serial groups. Click the ‘Serial
groups settings’ link to forward to the ‘PBX/Serial groups’ configuration section (see 2.4.7 The ‘Serial
groups’ submenu for detailed description).
- Group name – identification group name;
- Phone – phone number assigned to the group;
- Ports in group – list of the device port included in the hunt group;
- Registration – when registration on SIP server is successful, this field displays
registration time. If registration is failed, the field will display ‘Not registered’ record;
- Registrar address – address of SIP server where the call group is registered.
IMS monitoring
IMS monitoring shows the status of some services (activated or not activated) on each
subscriber line, if this line allows remote control from the IMS server (IP Multimedia Subsystem).
- IMS management – shows whether the subscriber line service remote control from IMS
server is enabled;
- Three-party conference – shows whether the 'Three-party conference' service activation
command is received from IMS server;
- Call hold – shows whether the 'Call hold' service activation command is received from
IMS server;
- Call waiting – shows whether the 'Call waiting' service activation command is received
from IMS server;
- Hotline – shows whether the 'Hotline' service activation command is received from IMS
server;
- Hotline number – shows phone number of ‘Hot line’ service activation command from
IMS server;