ELTEX TAU-4.IP - Network Settings Level Commands

166 VoIP Subscriber Gateways
CONFIG
Example
tau-8(config)# voice profile 2
tau-8(config-voice-profile)#
Network settings level commands
dhcp
Enables network interface configuration via DHCP.
Syntax
dhcp
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Set static network setting configuration receiving mode
Example
tau-8(config-net)# dhcp
dhcp_gateway
The command is intended for using default gateway received via DHCP (default: don't use).
Syntax
dhcp_gateway
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Use default gateway, set in the device configuration
Example
tau-8(config-net)# dhcp_gateway
dhcp_dns
Enables the use of the DNS server received via DHCP (default: don't use).
Syntax
dhcp_dns