ELTEX TAU-4.IP - The Call History Submenu; The Security Submenu; The General Submenu

93 VoIP Subscriber Gateways
Changes in this submenu take effect immediately after clicking the 'Apply' button. Device
reboot is not required.
To store changes to the operative memory of the device, click the Save Changes button. To store
settings into the non-volatile memory, click Apply button.
2.4.10 The ‘Call History’ submenu
For detailed description of parameter settings, see 2.4.10 The ‘Call History’ submenu.
Call history saving
To save ‘voip_history’ history file on local PC, click ‘Download call history file’ button.
Viewing call history
Click ‘View call history’ button to view call log of ‘Status/Call history’ section.
Call history size – maximum number of log records, may take values from 0 to 20,000 strings.
Enter '0' value to disable call history logging.
To clear call history, click ' Clean history' button.
To store changes to the operative memory of the device, click the Save Changes button. To store
settings into the non-volatile memory, click Apply button.
2.5 The ‘Security’ submenu
Use ‘Security’ menu to configure firewall (install security level and limit of transit traffic). Menu
is available for TAU-8.IP-W.
2.5.1 The ‘General’ submenu
Use this submenu to provide required protection level. The changes of the submenu will be
applied without reboot.
Security Level:
- No Security – incoming traffic is permitted (from WAN to WLAN), outputting traffic
(from WLAN to WAN) is permitted;
- Inbound Security – incoming traffic (from WAN to WLAN) is forbidden, outputting traffic
(from WLAN to WAN) is permitted;
Changes in this submenu take effect immediately after clicking the 'Apply' button. Device
reboot is not required.