ELTEX TAU-4.IP User Manual

54 VoIP Subscriber Gateways
- Sys Location – the device location information;
- TrapCommunity – password enclosed in traps (by default: trap).
In the current firmware version by using SNMP, you may get the device specific statistical
information about its network interfaces trough OID 1.3.6.1.2.1.2: network interface list, IP and MAC
addresses specified to network interfaces, number of received and transmitted packets, number of
received and transmitted bytes, count of errors, losses etc.
The list of objects, that may be read and configured via SNMP, is given below:
- Enterprise.1.3.1 – SIP profile basic settings
- Enterprise.1.3.2.1 – SIP profile settings
- Enterprise.1.1.2.1 – FXS port settings
- Enterprise.1.2.1.1 – FXS profile settings
- Enterprise.1.4.1.1 – call group settings
- Enterprise.1.5 – VAS activation codes for the phone unit
- Enterprise.2.1 – SNMP settings
- Enterprise.3.1 – system log settings. Where Enterprise – 1.3.6.1.4.1.35265.1.55 is the
TAU-8.IP device identifier.
To store changes to the operative memory of the device, click the Save Changes button. To store
settings into the non-volatile memory, click Apply button.
2.3 The ‘Print Server’ menu
Use the ‘Print server’ menu to configure the print server.
- Enable print server – when checked, print server is enabled.

ELTEX TAU-4.IP Specifications

General

Brand	ELTEX
Model	TAU-4.IP
Category	Gateway
Language	English