EasyManuals Logo

ELTEX TAU-4.IP User Manual

Default Icon
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12 VoIP Subscriber Gateways
Figure 1 shows application diagram of the equipment via TAU-8.IP-W example.
Fig. 1 TAU-8.IP-W Functional diagram
1.4 Product design and operating principle
TAU-4.IP/TAU-8.IP/TAU-8.IP-W subscriber terminal consists of the following subsystems:
- Controller featuring:
Mindspeed digital signal processor;
flash memory 32MВ;
SDRAM 256МВ;
- SLIC subscriber unit module (4 or 8 FXS ports);
- Ethernet-module RJ-45 10/100/1000BASE-T WAN;
- Wi-Fi adapter (only for TAU-8.IP-W);
- USB-module.
Fig. 2 shows the device architecture diagram.
TAU-4.IP and TAU-8.IP architecture diagrams differ by the number of ports and presence of Wi-
Fi module in the TAU-8.IP-W.
The device runs under Linux operating system. Mindspeed digital signal processor performs
basic control functions. It enables IP-packets routing, IP-telephony operation, group traffic proxying
etc.

Table of Contents

Other manuals for ELTEX TAU-4.IP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX TAU-4.IP and is the answer not in the manual?

ELTEX TAU-4.IP Specifications

General IconGeneral
BrandELTEX
ModelTAU-4.IP
CategoryGateway
LanguageEnglish

Related product manuals