EasyManuals Logo

ELTEX TAU-4.IP User Manual

Default Icon
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23 VoIP Subscriber Gateways
Daylight saving (DST start) setting of the moment and time of daylight saving by
the format of ‘week number, day, hour, minutes’, for example the last Sunday of
July at half night;
DST end you can set date and time of daylight saving time (DST) in the format
‘week number, week day, month, hours, minutes’, for example, the second Sunday
of October, 00 hours 00 minutes;
DST offset (minutes) set the time shift value, in minutes;
- Enable NTP set the flag to enable synchronization of the device system time from
specified NTP server.
- Get the NTP server address automatically set the flag to get NTP server address from
DHCP server (option 42) automatically.
- NTP Server IP-address/domain of NTP-server.
Access Ports:
- HTTP port specify a port for access via HTTP protocol;
- HTTPS port specify a port for access via HTTPS protocol;
- Telnet port specify a port for access via Telnet protocol;
- SSH port specify a port for access via SSH protocol;
- FTP port specify a port for access via FTP protocol.
To store changes to the RAM of the device, click the Save Changes button. To store settings into
the non-volatile memory, click Apply button.
2.1.2 The ‘WEB Authentication’ submenu
Use the submenu to assign passwords for administrator and unprivileged user.
TAU-8.IP implies two types of the users: admin and user. User admin (default password:
password) has full access to the device: read/write any settings, full device status monitoring. User
user (default password: user) may access device status monitoring without reading and recording
configuration data. Viewer (spectator, default password: viewer) may only view full device
configuration without editing privileges and access full device status monitoring.
Administrator password is used for administrator access via Web-interface, Telnet and SSH
protocols. User password is used for unprivileged user access via Web, Telnet, SSH and FTP. Viewer
password is used to view the device settings via Web, Telnet, SSH and FTP.

Table of Contents

Other manuals for ELTEX TAU-4.IP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX TAU-4.IP and is the answer not in the manual?

ELTEX TAU-4.IP Specifications

General IconGeneral
BrandELTEX
ModelTAU-4.IP
CategoryGateway
LanguageEnglish

Related product manuals