ELTEX TAU-4.IP - Page 170

170 VoIP Subscriber Gateways
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Disable NTP.
Example
tau-8(config-net)# ntp enable
ntp ipaddr
The command is intended for setting remote time synchronization server address.
Syntax
ntp ipaddr <value>
Parameters
<value> - IP address
Privilegy
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Set the default value of NTP server address (Default: 0.pool.ntp.org)
Example
tau-8(config-net)# ntp ipaddr 192.168.11.1
ntp timezone
The command is intended for setting the timezone.
Syntax
ntp timezone <value>
Parameters
<value> : -12..+12
Privilegy
priv
Command mode
CONFIG-NETWORK
Negotiation function 'no' command
Sets the factory settings of time zone (default: GMT0).
Example
tau-8(config-net)# ntp timezone +1
snmp enable
The command is intended for enabling SNMP.
Syntax