32 VoIP Subscriber Gateways
- Additional parameters – additional parameters of initialization (given by provider; for
example Megafon mobile operator CGDCONT=1,IP,internet);
- Called number – it is given by provider (for example the Megafon *99***1#);
- Access configuration – if necessary, set flags under required protocol.
When ‘Switch to backup channel’ connection mode is selected, selection of preferred channel
becomes available (but only for Internet):
- Preferred channel – select the type of preferred channel from drop down list:
Wired – channel via Ethernet WAN port of the device.
Wireless – channel via mobile communication network through USB-modem.
- Type of WAN Traffic – selection of traffic type (Untagged and Tagged);
VLAN ID – VLAN ID used for the service;
Priority (802.1p) – 1р priority settings for the VLAN ID;
- Protocol for WAN – protocol selection for establishing a connection:
Static – operation mode where IP address for WAN-interface is assigned statically.
When 'Static' type is selected, the following parameters will be available for
editing: