52 VoIP Subscriber Gateways
To add new rout, click ‘Add’ and fill the following fields:
- Route Name – rout name (it is used for convenience);
- Destination IP – destination address by which rout is established. Destination IP is
specified in the IPv4 format (can be subnet address or host address);
- Netmask – subnet mask to which rout is created– used in cooperation with destination
IP and together they determine network address or host, if mask has value
255.255.255.255);
- Gateway – device IP address for connection to the destination network.
To add route in the table, click ‘Save’ button.
To edit route in the table ‘Static routs’ in the ‘Action’ column, click . To delete - on the icon
.
To store changes to the operative memory of the device, click the Save Changes button. To store
settings into the non-volatile memory, click Apply button.
Changes in this submenu take effect immediately after clicking the 'Apply' button.
Device reboot is not required.
To Next Page
Loading...
