84 VoIP Subscriber Gateways
To set the parameters of acoustic signals manually, use ‘Manual tone configuration’. You can set
frequencies and signal cadences listed below:
- 'Station reply' tone frequency, Hz
- 'Station reply' tone cadences, ms
- 'Busy' tone frequency, Hz
- 'Station reply' tone cadences, ms
- 'Ringback' tone frequency, Hz
- 'Ringback' tone cadences, ms
- 'Congestion' tone frequency, Hz
- 'Congestion' tone cadences, ms
Value limits:
- the range for frequencies: 0 – 4000 Hz;
- the range for time intervals: 0 – 65535 ms.
To Next Page
Loading...
