User Manual QT series generation 2.5, ID 2021, rev 3.2, January 14, 2022
This chapter includes safety information that the user needs to know to
operate the equipment without harming personnel or the environment.
The operation of the equipment is safe provided that the recommended
operating procedures are followed. There are specific hazards however that
need to be addressed so that the user knows how to deal with them.
Electrical installations shall be designed and installed by personnel with
certifications according to applicable laws and regulations. Ensure that all
such work is done according to applicable laws and regulations.
Service must always be performed by trained personnel.
All batteries and electronic equipment may contain substances harmful to
the environment. Therefore, after removing used equipment, return them for
disposal according to local governmental guidelines.
Caution! Do not use ammonia, alkaline cleaners, lye or strong acid for cleaning as this
can damage the protective anodized layer of the product surface.
Caution! Do not use high pressure power washer directly on the actuators, as the
product is not IP69K rated.
To Next Page
Loading...
Need help?
General
