• Reduced power consumption that gives a greener profile.
• Self-lock feature allows movements from the motor, but immediately locks
movements from the valve side.
• Fast and precise motor that reduces the closing time.
• Low start-up load enables a high number of actuators per power fuse.
• Remote programming via the CAN bus protocol on the Hybrid Marine Cable.
• Specific alarms including over-torque and temperature – providing high
operational safety.
• Option for Dual CAN see Appendix A on page 61.
• Option for Failsafe operation see Appendix B on page 66
Eltorque actuators are an ideal choice in a wide range of Maritime and Onshore
systems such as:
• Cargo handling
• Bilge and ballast
• Tank gauging
• SPS system
• Anti-heeling systems
• RSW systems
• Bulk handling
• Fuel systems
• Hydro power and district heating
• Waste water treatment
• HVAC system
• Fire water system
• Oil Production system, oil transfer line
If you require technical support outside of this manual, we recommend that you
use the support functions available on the web-site or contact us via e-mail.
If you have feedback to this manual, that should also be routed through e-mail.
Eltorque AS
Julianus Holms veg 34
7071 Trondheim
Norway
Web: www.eltorque.no
e-mail: info@eltorque.no
Phone: +47 74 85 55 20
Fax: +47 74 85 55 12
The following reader groups have been defined for this User Manual:
To Next Page
Loading...
