Ordering Information and Recommended Spare Parts
User Manual QT250 and QT800 gen 2.5, ID 2021 2.3 20. April 2021
QT800 2.5 Digital/Analog Actuator
3
QT800 2.5 Actuator
Digi/Analog
1
with: 1blind cable gland, IP68, Non-EMC, RoHS
+ 4 standard Eltorque cable glands. Nickel plated brass, IP68, Non-EMC, RoHS. Clamping range 8 –
14mm/0.32- 0.55 in.
2
with 3 blind cable glands, IP68, Non-EMC, RoHS
+ 2 Eltorque cable glands. Nickel plated brass. IP68, Non-EMC, RoHS. Clamping range 8 –
14mm/0.32- 0.55 in.
3
with 5 blind cable glands, IP68, Non-EMC
As standard the interface box is delivered with non-EMC glands. If you require
EMC glands, please notify your sales contact when ordering, or at the latest 2
working weeks before delivery.
When the communication interface box is replaced, it must be re-configured by
using E3C. The Eltorque Configuration Cable which is needed to connect to the
actuator must be ordered separately if not already at hand.
Table 14: CANopen interface boxes
QT250 2.5 CANopen Communication
Interface Box
1
QT250 2.5 CANopen
Interface
QT250 2.5 CANopen Communication
Interface Box for Hybrid Marine Cable
2
QT250 2.5 CANopen
Interface
QT800 2.5 CANopen Communication
Interface Box
1
QT800 2.5 CANopen
Interface
QT800 2.5 CANopen Communication
Interface Box for Hybrid Marine Cable
2
QT800 2.5 CANopen
Interface
Table 15: Digital/analog interface boxes
QT250 2.5 Digital/Analog
Communication Interface Box
3
QT250 2.5 Digital/Analog
Interface
QT800 2.5 Digital Communication
Interface Box
3
QT800 2.5 Digital
Interface
1
with: 1 blind cable gland, IP68, Non-EMC, RoHS
+ 4 standard Eltorque cable glands. Nickel plated brass, IP68, Non-EMC, RoHS. Clamping range 8 –
14mm/0.32- 0.55 in.
2
with 3 blind cable glands, IP68, Non-EMC, RoHS
+ 2 standard Eltorque cable glands. Nickel plated brass. IP68, Non-EMC, RoHS. Clamping range 8 –
14mm/0.32- 0.55 in.
3
with 5 blind cable glands, IP68, Non-EMC
To Next Page
Loading...
