Command set conventions
15
Overview
Options and names are case sensitive. If an uppercase letter is
specified in the syntax, a lowercase letter is not accepted.
The vertical bar symbol ( | ) represents or, meaning an alternate
selection:
{
-all | <fs_name> | <pathname> }
Command prefixes
Commands are prefixed depending on to what they are
administering. For example, commands prefixed with:
◆ cel_ execute to the remotely-linked Celerra system.
◆ cs_ execute to the Control Station.
◆ fs_ execute to the specified file system.
◆ nas_ execute directly to the Control Station database.
◆ server_ require a movername entry and execute directly to a Data
Mover.
To Next Page
Loading...
