EMC Celerra

fs_dhsm
41
The fs Commands
fs_dhsm
Manages the Celerra FileMover file system connections.
SYNOPSIS
fs_dhsm
-list
| -info [<fs_name>|id=<fs_id>]
| -modify {<fs_name>|id=<fs_id>}[-state {enabled|disabled}]
[-popup_timeout <sec>] [-backup {offline|passthrough}]
[-log {on|off}][-max_log_size <mb>][-offline_attr {on|off}]
[-read_policy_override {none|full|passthrough|partial}]}
| -connection [<fs_name>|id=<fs_id>]
-list
| -info [<cid>]
| -create -type {nfsv3|nfsv2} -secondary <nfs_server>:/<path>
[-read_policy_override {full|passthrough|partial|none}]
[-useRootCred {true|false}] [-proto {UDP|TCP}] [-nfsPort <port>]
[-mntPort
<port>] [-mntVer {3|2|1}] [-localPort <port>]
|-create -type cifs -admin [<fqdn>\]<admin_name>
-secondary \\<fqdn>\<share>[\<path>]
-local_server <host_name> [-wins <address>][-password <password>]
[-read_policy_override {full|passthrough|partial|none}]
|-create -type http -secondary http://<host><url_path>
[-read_policy_override {full|passthrough|partial|none}]
[-httpport <port>][-localport <port>]
[–user <username> [-password <password>]]
[-timeout <seconds>][-cgi {y|n}]
| -delete {-all|<cid>[,<cid>...]} [-recall_policy {check|no|yes}]
| -modify {-all|<cid>[,<cid>...]} [-state {enabled|disabled|recallonly}]
[
-read_policy_override {full|passthrough|partial|none}]
[{[-nfs_server <address>] [-localPort <port>]
[-proto {TCP|UDP}] [-useRootCred {true|false}]}
|{[-cifs_server <fqdn>] [-local_server <host_name>]
[-password <password>] [-admin [<fqdn>\]<admin_name>]
[-wins <address>]}
|{[-http_server <host>] [-httpPort <port>]
[-localPort <port>] [-user <username>]
[-password <password>] [-timeout <seconds>]}
DESCRIPTION fs_dhsm modifies the properties on file systems enabled for Celerra
FileMover. fs_dhsm creates, deletes, and modifies NFS, CIFS, and
HTTP connections to remote hosts, lists Celerra FileMover file
systems, and provides information on the connections.
OPTIONS -list
Lists all file systems enabled with the Celerra FileMover.