EMC Celerra

nas_quotas
217
The nas Commands
nas_quotas
Manages quotas for mounted file systems.
SYNOPSIS
nas_quotas
-edit [ -user | -group ]{-mover <movername> | -fs <fs_name>} [-path
<pathname>]}[[-proto <proto_id>]|[-block <hard_limit>[:<soft_limit>]]
[-inode <hard_limit>[:<soft_limit>]]] <id> [<id>...]
| -edit -config {-mover <movername> | -fs <fs_name>}[-path <pathname>]}
[-option <options>]
| -edit -tree -fs <fs_name>
[[-proto <proto_id>]|[-block <hard_limit>[:<soft_limit>]]
[-inode <hard_limit>[:<soft_limit>]]]
[-comment <comment>] <id> [<id>...]
| -report [-user | -group]{-mover <movername> | -fs <fs_name>}
[-path <pathname>]}[<id> <id>...]
| -report -config {-mover <movername> | -fs <fs_name>} [-path <pathname>]}
| -report -tree -fs <fs_name> [<id> <id>...]
| {-on | -off | -clear}[-user | -group | -both]
{-mover <movername> | -fs <fs_name> | [-path <pathname>] -all}
| -on -tree -fs <fs_name> -path <pathname> [-comment <comment>]
| -off -tree -fs <fs_name> -path <pathname>
| {-list | -clear} -tree -fs <fs_name>
DESCRIPTION nas_quotas edits quotas for mounted file systems, and displays a
listing of quotas and disk usage at the file system level (by the user,
group, or tree), or at the quota-tree level (by the user or group).
nas_quotas turns quotas on and off, and clears quotas records for a
file system, quota tree, or a Data Mover. When a Data Mover is
specified, the action applies to all mounted file systems on the Data
Mover.
CAUTION
!
Quotas should be turned on (enabled) before file systems go into a
production environment. Enabling (or disabling, or clearing)
quotas in a production environment is time consuming and the
process may disrupt file system operation. CIFS clients are
disconnected during these events and NFS clients receive a
message that the server is not responding. However, once enabled,
quotas can be changed at any time without impact.