EMC Celerra User Manual

nas_replicate
235
The nas Commands
server_4:
This command was run on the source Celerra Network Server.
Where:
$ nas_replicate -list
server_2:
Local Source
Local Destination
session_id = fs25_T6_LUN1_000190100577_0047_fs23_T2_LUN1_000190100559_0047
application_label = RM/SE_WINSERVER1_L:\
session_id = fs25_T6_LUN0_000190100577_0047_fs23_T2_LUN0_000190100559_0047
application_label = RM/SE_WINSERVER1_K:\
session_id = fs25_T6_LUN2_000190100577_0047_fs23_T2_LUN2_000190100559_0047
application_label = RM/SE_WINSERVER1_G:\_ContainsRmDatabase
server_3:
server_4:
This command was run on the destination Celerra Network Server.
EXAMPLE #2 To list all replication sessions and display the status of each session,
type:
$ nas_replicate -info -all
server_2:
session_id = fs25_T6_LUN1_000190100577_0047_fs23_T2_LUN1_000190100559_0047
application_label = RM/SE_WINSERVER1_L:\
replication source:
src_target_name = iqn.1992-05.com.emc:dr-target
src_LUN_number = 1
name = fs25_T6_LUN1_000190100577_0047
replicator_state = WaitingForRequest
latest_snap_replicated = fs23_T2_LUN1_000190100559_0047.ckpt000
current_number_of_blocks = 0
transport_type = DP_REP_TRANSPORT_TYPE_RCP
replication destination:
dst_target_name = iqn.1992-05.com.emc:0001901005590047-2
dst_LUN_number = 1
name = fs23_T2_LUN1_000190100559_0047
playback_state = WaitingForRequest
outstanding snaps:
Value Definition
session_id globally unique character string used as the identifier of the iSCSi replication session.
alias alias name for the iSCSI replication session identifier.
application_label name of the application using the iSCSI replication session.

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English