server_checkup
303
The server Commands
EXAMPLE #4 To list the available dependencies of the CIFS component, type:
$ server_checkup server_2 -info CIFS
server_2 :
done
COMPONENT : CIFS
DEPENDENCY : ACL
DESCRIPTION : Number of ACL per file system.
TESTS :
In full mode, check if the number of ACL per file system doesn't exceed 90% of the
maximum limit.
COMPONENT : CIFS
DEPENDENCY : Connection
DESCRIPTION : TCP connection number
TESTS :
Check if the number of CIFS TCP connections doesn't exceed 80% of the maximum
number.
COMPONENT : CIFS
DEPENDENCY : Credential
DESCRIPTION : Users and groups not mapped
TESTS :
Check if all credentials in memory are mapped to a valid SID.
COMPONENT : CIFS
DEPENDENCY : DC
DESCRIPTION : Connectivity to the domain controllers
TESTS :
Check the connectivity to the favorite DC (DCPing),
In full mode, check the connectivity to all DC of the domain,
Check if DNS site information are defined for each computer name,
Check if the site of each computer name has an available DC,
Check if trusted domain of each computer name can be reached,
Check the ds.useDCLdapPing parameter is enabled,
Check the ds.useADSite parameter is enabled.
COMPONENT : CIFS
DEPENDENCY : DFS
DESCRIPTION : DFS service configuration on computer names
TESTS :
Check the DFS service is enabled in registry if DFS metadata exists,
Check the DFS metadata of each share with DFS flag are correct,
Check if share names in DFS metadata are valid and have the DFS flag,
Check if each DFS link is valid and loaded,
Check in the registry if the WideLink key is enabled and corresponds to a valid
share name.
COMPONENT : CIFS
DEPENDENCY : DNS
DESCRIPTION : DNS domain configuration
To Next Page
Loading...
Need help?
General
