EMC Celerra User Manual

fs_ckpt
31
The fs Commands
EXAMPLE #2 To create a checkpoint of ufs1 named ufs1_ckpt2 with a size of 2
gigabytes using the clar_r5_performance pool, with the specified
storage system, with the %full set to 95, type:
$ fs_ckpt ufs1 -name ufs1_ckpt2 -Create size=2G pool=clar_r5_performance
storage=APM00043807043 -option %full=95
operation in progress (not interruptible)...id = 27
name = ufs1
acl = 0
in_use = True
type = uxfs
worm = off
volume = mtv1
pool =
rw_servers= server_2
ro_servers=
rw_vdms =
ro_vdms =
ckpts = ufs1_ckpt1,ufs1_ckpt2
stor_devs = APM00043807043-0010,APM00043807043-0014
disks = d7,d9
disk=d7 stor_dev=APM00043807043-0010 addr=c0t1l0 server=server_2
disk=d7 stor_dev=APM00043807043-0010 addr=c16t1l0 server=server_2
disk=d9 stor_dev=APM00043807043-0014 addr=c0t1l4 server=server_2
disk=d9 stor_dev=APM00043807043-0014 addr=c16t1l4 server=server_2
id = 30
name = ufs1_ckpt2
acl = 0
in_use = True
type = ckpt
worm = off
volume = vp145
pool =
member_of =
rw_servers=
ro_servers= server_2
rw_vdms =
ro_vdms =
checkpt_of= ufs1 Wed Nov 10 14:00:20 EST 2004
used = 0%
full(mark)= 95%
stor_devs = APM00043807043-0011,APM00043807043-0017
disks = d12,d15
disk=d12 stor_dev=APM00043807043-0011 addr=c16t1l1 server=server_2
disk=d12 stor_dev=APM00043807043-0011 addr=c0t1l1 server=server_2
disk=d15 stor_dev=APM00043807043-0017 addr=c16t1l7 server=server_2
disk=d15 stor_dev=APM00043807043-0017 addr=c0t1l7 server=server_2
See Example #1 for a description of command output.

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English