EMC Celerra

328
Celerra Network Server Command Reference Manual
The server Commands
CIFS Server DM112-CGE0[NASDOCS] RC=2 (Hidden)
Alias(es): DM112-CGEA1
Full computer name=dm112-cge0.nasdocs.emc.com realm=NASDOCS.EMC.COM
Comment='EMC Celerra'
if=cge0 l=172.24.102.242 b=172.24.102.255 mac=0:60:16:4:35:4f
wins=172.24.102.25:172.24.103.25
FQDN=dm112-cge0.nasdocs.emc.com (Updated to DNS)
Password change interval: 30 minutes
Last password change: Thu Oct 27 16:29:21 2005
Password versions: 3, 2
See Example #5 for a description of command outputs.
EXAMPLE #15 To add a Windows 2000 or later server named, dm112-cge0, in the
Active Directory domain nasdocs.emc.com, with the interface for
CIFS service as cge0, and enable local users support, type:
$ server_cifs server_2 -add
compname=dm112-cge0,domain=nasdocs.emc.com,interface=cge0,local_users
server_2 : Enter Password:********
Enter Password Again:********
done
EXAMPLE #16 To set a security mode to NT for a Data Mover, type:
$ server_cifs server_2 -add security=NT
server_2 : done
EXAMPLE #17 To disable a CIFS interface, type:
$ server_cifs server_2 -Disable cge1
server_2 : done
EXAMPLE #18 To display CIFS audit information for a Data Mover, type:
$ server_cifs server_2 -option audit
server_2 :
|||| AUDIT Ctx=0xad3d4820, ref=1, W2K3 Client(WINSERVER1) Port=1638/139
||| DM112-CGE0[NASDOCS] on if=cge0
||| CurrentDC 0xad407620=WINSERVER1
||| Proto=NT1, Arch=Win2K, RemBufsz=0xffff, LocBufsz=0xffff
||| 0 FNN in FNNlist NbUsr=1 NbCnx=1
||| Uid=0x3f NTcred(0xad406a20 RC=2 KERBEROS Capa=0x2) 'NASDOCS\administrator'
|| Cnxp(0xad3d5420), Name=IPC$, cUid=0x3f Tid=0x3f, Ref=1, Aborted=0
| readOnly=0, umask=22, opened files/dirs=1
|||| AUDIT Ctx=0xad43c020, ref=1, W2K3 Client(172.24.102.67) Port=1099/445
||| DM112-CGE0[NASDOCS] on if=cge0
||| CurrentDC 0xad407620=WINSERVER1
||| Proto=NT1, Arch=Win2K, RemBufsz=0xffff, LocBufsz=0xffff