332
Celerra Network Server Command Reference Manual
The server Commands
TransNT 8 0.05 0.01 0.00
CreateNTX 1338 8.16 47.11 0.81
CancelNT 1 0.01 0.03 0.00
Trans2 SMBs:
proc ncalls %totcalls maxTime ms/call
FindFirst 22 0.23 0.22 0.09
QFsInfo 3154 33.65 0.08 0.05
QPathInfo 1113 11.87 6.73 0.15
QFileInfo 2077 22.16 0.04 0.02
SetFileInfo 3007 32.08 34.26 1.28
NT SMBs:
proc ncalls %totcalls maxTime ms/call
NotifyChange 8 100.00 0.01 0.00
Performance info:
Read Re/s Write Wr/s All Ops/sec
231 231000.00 3697 1021.27 25783 1575.40
State info:
Open connection Open files
2 2
Shadow info:
Reads Writes Splits Extinsert Truncates
0 0 0 0 0
SMB total requests:
totalAllSmb totalSmb totalTrans2Smb totalTransNTSmb (unsupported)
25783 16400 9375 8 2
Where:
EXAMPLE #35 To reset to zero the values for all SMB statistics, type:
$ server_cifs server_2 -stats -zero
server_2 : done
Value Definition
proc name of CIFS requests received.
ncalls number of requests received.
%totcalls % of this type of request compared to all requests.
maxTime maximum amount of time used.
ms/call average time in milliseconds taken to service calls.
failures number of times the call has failed.
To Next Page
Loading...
Need help?
General
