334
Celerra Network Server Command Reference Manual
The server Commands
Where:
EXAMPLE #2 To immediately halt server_2, type:
$ server_cpu server_2 -halt now
server_2 : done
EXAMPLE #3 To immediately reboot server_2, type:
$ server_cpu server_2 -reboot now
server_2 : done
EXAMPLE #4 To monitor a reboot of server_2 set to take place in one minute, type:
$ server_cpu server_2 -reboot -monitor +1
server_2 : reboot in progress ........3.3.3.3.3.done
Value Definition
0 reset
1 DOS booted
2 SIB failed
3 loaded
4 configured
5 contacted
7 panicked
9 reboot pending
To Next Page
Loading...
