To Next Page

To Previous Page

358

Celerra Network Server Command Reference Manual

The server Commands

EXAMPLE #2 To export an NFS entry and overwrite existing settings, type:

$ server_export server_2 -Protocol nfs -ignore -option

access=172.24.102.0/255.255.255.0,root=172.24.102.240 -comment 'NFS Export for

ufs1' /ufs1

server_2 : done

EXAMPLE #3 To export NFS entry dir1, a subdirectory of the exported entry /ufs1

in a multilevel file system hierarchy, type:

$ server_export server_2 -Protocol nfs /ufs1/dir1

server_2 : done

EXAMPLE #4 To assign a name to a NFS export, type:

$ server_export server_2 -Protocol nfs -name nasdocsfs /ufs1

server_2 : done

EXAMPLE #5 To export an NFS entry using Kerberos authentication, type:

$ server_export server_2 -Protocol nfs -option

sec=krb5:ro,root=172.24.102.240,access=172.24.102.0/255.255.255.0 /ufs2

server_2 : done

EXAMPLE #6 To export an NFS entry for NFSv4 only, type:

$ server_export server_2 -Protocol nfs -option nfsv4only /ufs1

server_2 : done

EXAMPLE #7 To list all NFS entries, type:

$ server_export server_2 -Protocol nfs -list -all

server_2 :

export "/ufs2" sec=krb5 ro root=172.24.102.240 access=172.24.102.0/255.255.255.0

export "/ufs1" name="/nasdocsfs" access=172.24.102.0/255.255.255.0

root=172.24.102.240 nfsv4only comment="NFS Export for ufs1"

export "/" anon=0

access=128.221.252.100:128.221.253.100:128.221.252.101:128.221.253.101

EXAMPLE #8 To list NFS entries for the specified path, type:

$ server_export server_2 -list /ufs1

server_2 :

export "/ufs1" name="/nasdocsfs" access=172.24.102.0/255.255.255.0

root=172.24.102.240 nfsv4only comment="NFS Export for ufs1"

EXAMPLE #9 To temporarily unexport an NFS entry, type:

$ server_export server_2 -Protocol nfs -unexport /ufs2

server_2 : done

EMC Celerra User Manual

Other manuals for EMC Celerra