414
Celerra Network Server Command Reference Manual
The server Commands
erase
Erase the entire tape.
-f <device>
Specifies the magnetic tape device to which the command is applied,
and the <device> which is the name of the tape drive.
-N
Indicates no rewind at the end of the tape.
The
server_devconfig <movername> -list -scsi -nondisks
command displays a listing of devices.
EXAMPLE To send the rewind command to tape1 (magnetic tape drive) on a
Data Mover, type:
$ server_mt server_2 -f tape1 rewind
To Next Page
Loading...
