fs_dhsm
45
The fs Commands
[-mntVer {1|2|3}]
Specifies the mount version for the NFS connection. If the -type is
nfsv3, then the -mntVer must be 3. If the -type is nfsv2, then 1 or 2
can be specified. The default for nfsv2 is 2.
[-localPort <port>]
Overrides the default port that the Data Mover uses during
connection to be compatible with firewalls. The default for UDP
is 1020. By default, TCP uses a random port over 1024 to make the
connection.
CIFS CONNECTIONS -connection <fs_name> -create -type cifs
Creates a connection using the CIFS protocol between the specified
file system and a secondary file system. A connection ID is
automatically created when a connection is established. The
connection ID is seen using the -list and is referred to as the <cid> in
other commands.
-admin [<fqdn>\]<admin_name>
Specifies the <admin_name> used to make the CIFS connection.
If an optional <fqdn> is specified, it must be a fully qualified
domain name. The [<fqdn>\]<admin_name> entry must be
enclosed within quotes as shown in Example #2. If the <fqdn> is
not specified, the -local_server domain is used.
-secondary \\<fqdn>\<share>[\<path>]
Specifies the CIFS server, the share, and path for the secondary
server for connection. The <fqdn>\<share>[\<path>] entry must
be enclosed by quotes. The domain must be fully qualified; an IP
address will not work.
-local_server <host_name>
Specifies the NetBIOS name or computer name of the local CIFS
server on the Data Mover.
[-wins <address>]
Specifies a WINS server to resolve names in a Windows NT
domain.
[-password <password>]
Allows the user to specify the admin password. The password is
not recorded in the command log. If the -password option is
given but no password is specified, the user is prompted
interactively.
To Next Page
Loading...
Need help?
General
