474
Celerra Network Server Command Reference Manual
The server Commands
Managing Celerra for the Windows Environment, Managing Celerra for a
Multiprotocol Environment, and Using SnapSure on Celerra,
server_mount, server_mountpoint, fs_ckpt.
EXAMPLE #1 To permanently unmount a file system, type:
$ server_umount server_2 -perm /bin
server_2: done
EXAMPLE #2 To temporarily unmount a file system by specifying its mount point
as /bin, type:
$ server_umount server_2 -temp /bin
server_2: done
EXAMPLE #3 To temporarily unmount a file system by specifying its file system
name as ufs1, type:
$ server_umount server_2 -temp ufs1
server_2: done
To Next Page
Loading...
