To Next Page

To Previous Page

server_vtlu

489

The server Commands

-tlu -info <tlu_id>

Displays information for the specified VTLU.

-tlu -new [-robot {[-vendor <vendor>] [-product <product>]

[-revision <revision>]}]

Creates a VTLU on the specified Data Mover with the specified

robot’s vendor, product, and revision information. If this information

is not specified, the default values of EMC, svtlRobot, and 1.0 are

used. These values have character limits of 8, 16, and 4, respectively.

[-slots <num_slots>]

Configures the number of slots in the VTLU. If no value is

defined, then the default value of 32 is used.

[-impexp <num_impexp_slots>]

Configures the number of import/export slots in the VTLU. If no

value is defined, the default value of 8 is used.

[-drives <num_drives>]

Configures the number of virtual tape drives in the VTLU. If no

value is defined, then the default value of 4 is used.

[-drive {[-vendor <vendor>] [-product <product>]

[-revision <revision>]}]

Specifies the vendor name, product name, and revision number

of the virtual drive. If no values are defined, the default values of

EMC, svtlDrive, and 1.0 are used. These values have character

limits of 8, 16, and 4, respectively.

-tlu -modify <tlu_id> [-robot {[-vendor <vendor>]

[-product <product>] [-revision <revision>]}]

Modifies the vendor name, product name, and revision number for

the virtual robot.

[-slots <num_slots>]

Modifies the number of virtual slots in the VTLU.

[-impexp <num_impexp_slots>]

Modifies the number of virtual import/export slots in the VTLU.

[-drives <num_drives>]

Modifies the number of virtual tape drives in the VTLU.

[-drive {[-vendor <vendor>] [-product <product>]

[-revision <revision>]}]

Modifies the vendor name, product name, and revision number

for the VTLU drive.

EMC Celerra User Manual

Other manuals for EMC Celerra