EMC Celerra - Page 53

fs_dhsm
53
The fs Commands
write policy = full
local_server = DM102-CGE0.NASDOCS.EMC.COM
admin = nasdocs.emc.com\Administrator
wins = 172.24.102.25
Done
See Example #2 for a description of command output.
EXAMPLE #4 To display connection information for ufs1, type:
$ fs_dhsm -connection ufs1 -info 1
ufs1:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = none
log file = on
max log size = 10MB
See Example #2 for a description of command output.
EXAMPLE #5 To modify the read_policy_override setting for connection 0 for ufs1,
type:
$ fs_dhsm -connection ufs1 -modify 0 -read_policy_override passthrough
ufs1:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = none
log file = on
max log size = 10MB
cid = 0
type = CIFS
secondary = \\winserver2.nasdocs.emc.com\dhsm1\
state = enabled
read policy override = pass
write policy = full
local_server = DM102-CGE0.NASDOCS.EMC.COM
admin = nasdocs.emc.com\Administrator
wins = 172.24.102.25
Done
See Example #2 for a description of command output.