fs_rdf
65
The fs Commands
volume = v168
pool =
rw_servers=
ro_servers=
rw_vdms =
ro_vdms =
backup_of = ufs1 Fri Apr 23 16:29:23 EDT 2004
stor_devs =
002804000190-0052,002804000190-0053,002804000190-0054,002804000190-0055
disks = rootd33,rootd34,rootd35,rootd36
RDF Information:
remote_symid = 002804000218
remote_sym_devname =
ra_group_number = 2
dev_rdf_type = R1
dev_ra_status = READY
dev_link_status = READY
rdf_mode = SYNCHRONOUS
rdf_pair_state = SYNCINPROG
rdf_domino = DISABLED
adaptive_copy = DISABLED
adaptive_copy_skew = 65535
num_r1_invalid_tracks = 0
num_r2_invalid_tracks = 736440
dev_rdf_state = READY
remote_dev_rdf_state = WRITE_DISABLED
rdf_status = 0
link_domino = DISABLED
prevent_auto_link_recovery = DISABLED
link_config =
suspend_state = NA
consistency_state = DISABLED
adaptive_copy_wp_state = NA
prevent_ra_online_upon_pwron = ENABLED
Where:
Value Definition
id ID of a file system that is assigned automatically.
name name assigned to a file system.
acl access control value for a file system.
in_use whether a file system is registered into the mount table.
type type of file system. See nas_fs for a description of the types.
volume volume on which a file system resides.
pool storage pool for the file system.
rw_servers servers with read-write access to a file system.
ro_servers servers with read-only access to a file system.
rw_vdms VDM servers with read-write access to a file system.
ro_vdms VDM servers with read-only access to a file system.
backup_of the remote RDF file system.
stor_devs the storage system devices associated with a file system.
disks
the disks on which the metavolume resides.
remote_symid the serial number of the storage system containing the target volume.
To Next Page
Loading...
Need help?
General
