fs_replicate
87
The fs Commands
source_ip = 172.24.102.238
source_port = 56686
destination_ip = 172.24.102.242
destination_port = 8888
QOS_bandwidth = 0 kbits/sec
Note: All times are in GMT. Block size is 8 KBytes.
done
See Example #2 for a description of the output.
EXAMPLE #6 To stop the playback and replication services from running and leave
replication in a condition where it can be restarted, on the source
Control Station, type:
$ fs_replicate -suspend src_ufs1 dst_ufs1:cel=cs110
operation in progress (not interruptible)...
id = 58
name = src_ufs1
fs_state = active
type = replication
replicator_state = active
source_policy = NoPolicy
high_water_mark = 0
time_out = 0
current_delta_set = 3
current_number_of_blocks = 0
flow_control = inactive
total_savevol_space = 1048576 KBytes
savevol_space_available = 917504 KBytes (Before Flow Control)
id = 30
name = dst_ufs1:cs110
type = playback
playback_state = active
high_water_mark = 600
time_out = 600
current_delta_set = 2
flow_control = inactive
total_savevol_space = 1048576 KBytes
savevol_space_available = 917504 KBytes (Before Flow Control)
outstanding delta sets:
Delta Source_create_time Blocks
-------- ------------------- ---------
2 2005-01-13 19:06:02 1
communication_state = alive
current_transfer_rate = ~ 13312 Kbits/second
avg_transfer_rate = ~ 13312 Kbits/second
source_ip = 172.24.102.238
source_port = 56675
To Next Page
Loading...
