EMC Celerra - Page 92

92
Celerra Network Server Command Reference Manual
The fs Commands
volume = v110
pool = clar_r5_performance
member_of = root_avm_fs_group_3
rw_servers=
ro_servers= server_2
rw_vdms =
ro_vdms =
stor_devs = APM00043807043-0019,APM00043807043-0016,APM00043807043-0013,APM00043
807043-0014
disks = d16,d11,d13,d10
disk=d16 stor_dev=APM00043807043-0019 addr=c16t1l9 server=server_2
disk=d16 stor_dev=APM00043807043-0019 addr=c0t1l9 server=server_2
disk=d11 stor_dev=APM00043807043-0016 addr=c0t1l6 server=server_2
disk=d11 stor_dev=APM00043807043-0016 addr=c16t1l6 server=server_2
disk=d13 stor_dev=APM00043807043-0013 addr=c16t1l3 server=server_2
disk=d13 stor_dev=APM00043807043-0013 addr=c0t1l3 server=server_2
disk=d10 stor_dev=APM00043807043-0014 addr=c0t1l4 server=server_2
disk=d10 stor_dev=APM00043807043-0014 addr=c16t1l4 server=server_2
done
Converting filesystem type
id = 30
name = dst_ufs1
acl = 0
in_use = True
type = rawfs
worm = off
volume = v110
pool = clar_r5_performance
member_of = root_avm_fs_group_3
rw_servers=
ro_servers= server_2
rw_vdms =
ro_vdms =
stor_devs = APM00043807043-0019,APM00043807043-0016,APM00043807043-0013,APM00043
807043-0014
disks = d16,d11,d13,d10
disk=d16 stor_dev=APM00043807043-0019 addr=c16t1l9 server=server_2
disk=d16 stor_dev=APM00043807043-0019 addr=c0t1l9 server=server_2
disk=d11 stor_dev=APM00043807043-0016 addr=c0t1l6 server=server_2
disk=d11 stor_dev=APM00043807043-0016 addr=c16t1l6 server=server_2
disk=d13 stor_dev=APM00043807043-0013 addr=c16t1l3 server=server_2
disk=d13 stor_dev=APM00043807043-0013 addr=c0t1l3 server=server_2
disk=d10 stor_dev=APM00043807043-0014 addr=c0t1l4 server=server_2
disk=d10 stor_dev=APM00043807043-0014 addr=c16t1l4 server=server_2
Operation complete
done
See Example #1 and #2 for a description of the output.
EXAMPLE #7 To restart a suspended replication relationship, on the source Control
Station type:
$ fs_replicate -restart src_ufs1 dst_ufs1:cel=cs110