19
Install - Step 1 continued
Install the storage-system hardware
3. Install the DAE-OS in the cabinet
The DAE-OS is a specially marked DAE that is paired with your SPE before shipment. It
contains the OS (vault) disks and system-specific configuration information. Make sure to
match the correct DAE-OS to your storage processor enclosure.
a. Install the rail kits.
Installing the DAE-OS rail kits
EMC3452
Right rear
Screw (2)
Alignment
pin (2)
Mounting rail
Alignment pins
Adjustable rail
Right front
Mounting rail
Screw (2)
To Next Page
Loading...
