33
Install - Step 7 continued
Power up and cable optional DAEs
Plugging in AC line cords
2. Connect the DAE power cords to an appropriate power source.
In most cases, you should connect each power cord to the closest power
distribution unit (PDU) in a cabinet. For example, connect power/cooling module
A to the right PDU, and power/cooling module B to the PDU on the left (facing
the rear of the cabinet).
The A side and B side PDUs should be connected to separate power feed circuits.
Then if power to one PDU fails, the storage-system enclosures connected to it will
continue to run.
! !
! !
!
E
XP PR
I
E
XP
PRI
#
!
EXP
P
RI
E
XP
PR
I
#
A
B
EMC3213
Retention Bail
Retention
Bail
To Next Page
Loading...
