43
Install - Step 9
Register your storage system
The Storage System Registration Wizard sends site and configuration information to
your service provider. We strongly recommend that you run the wizard now as
follows:
1. Verify that the client is connected to both the storage system and to the Internet.
2. If the Unisphere Service Manager (USM) is not open, start it now. After logging in
to your system, select the Registration tab and click Register Storage System to
start the Storage System Registration Wizard.
3. Follow the wizard prompts to complete the registration.
Install - Step 10
What next?
We recommend that you set up either the iSCSI or the Fibre Channel environment
and confirm its error-free operation before setting up the second environment.
• The first set of instructions, beginning on the next page, describes how to
install the storage system in an iSCSI environment.
• The second set of instructions, beginning on page 54, describes how to
install the storage system in a Fibre Channel environment.
To Next Page
Loading...
