EMC CLARiiON CX4-120 - Install - Step 5 Connect the initialization client; Connecting to a shared management LAN

29
Install - Step 5
Connect the initialization client
Use CAT 5e or better Ethernet cables to connect each SP to a network shared by the
host from which you will manage the storage system.
To initialize the storage system you will need a host connected to the same subnet as
the storage system’s SP. This host can be the client from which you launch Unisphere
or Navisphere Manager.
Connecting to a shared management LAN
Connecting to a local management client
123
10/100/1000
0
10/100/1000
0
MGMT B MGMT A
LAN
CL4109
CL4106
Hub
123
10/100/1000
0
10/100/1000
0
MGMT B MGMT A