41
Install - Step 8
Update software
Your storage system shipped from the factory with the latest version of FLARE
software available at that time. Use the Software Assistant wizard to determine
whether you need to install a FLARE operating environment (OE) patch. If you
purchased optional SnapView™, MirrorView™, or SAN Copy™ software, use the
wizard to install enabler software for those products.
The Software Assistant wizard is part of the Unisphere Service Manager, which
replaces the Navisphere Service Taskbar.
Install the Unisphere Service Manager
1. Download the Unisphere Service Manager (USM) from the Powerlink CLARiiON
Too ls page for your storage system.
a. On the CLARiiON Tools page on the Powerlink website, select your
CLARiiON system.
b. Select Unisphere Service Manager and select the option to save the software
to your host or client.
c. In the folder where you saved the USM, double-click the executable file, and if
necessary, click Run to start the installation wizard.
d. Follow the instructions that appear.
e. After you accept the license agreement, the wizard verifies that the server is
running the supported Java Runtime Environment (JRE) version.
• If the server is running an earlier version of the JRE, select Yes when asked
if you want to continue with the installation. The installation wizard
prompts you to download and install the later version of the JRE from the
Sun website.
• If the server is running a later version of the JRE, the installation wizard
asks if you want to continue with the installation. Select Yes to continue or
No to quit the installation.
If you select Yes, the USM may not work properly with a later JRE version. If you select No,
and manually remove the later version of the JRE, other applications that require this version
may not work properly.
2. When the installation is complete, click Done.
To Next Page
Loading...
