42
Install - Step 8 continued
Update software
Installing a FLARE OE patch or software enabler
1. Start the Unisphere Service Manager.
2. Log in to your storage system.
3. Select Software > System Software, and then click Prepare for Installation (Step
1).
4. In the welcome page, select Download software only. The wizard determines the
revision of software installed on the system and notifies you of any required
patches or newer releases.
5. Select and download any software that you want to install, and click Finish.
6. Select Install Software to install any patches or software that you downloaded in
the previous step, and to install any enablers that you ordered with your system.
7. Once you have checked for updates and installed software, proceed to the next
step.
To Next Page
Loading...
