EMC VNX Series Parts Location Guide

26 EMC VNX7500 Parts Location Guide
I/O modules
Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
Figure 21 shows the part number label location on the two-port 1-Gb/s copper plus
two-port 1-Gb/s optical I/O module (labeled 1 GbE on the latch handle).
Figure 21 Example of the two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module
Table 16 shows the part number label location, part number, description, and whether it
is a FRU or CRU.
Part Number (P/N) Label
CNS-001701
Table 16 Two-port 1-Gb/s copper plus two-port 1-Gb/s optical I/O module part number
Part number label
location
(Figure 21) Part number Description FRU CRU
303-122-100A Two-port 1-Gb/s copper plus
two-port 1-Gb/s optical


EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)