To Next Page

To Previous Page

I/O modules

EMC VNX7500 Parts Location Guide 27

Two-port 10-GbE optical I/O module

Figure 22 shows the part number label location on the two-port 10-Gb/s optical I/O

module (labeled 10 GbE iSCSI or 10 GbE v2 on the latch handle).

Figure 22 Example of the two-port 10-Gb/s optical I/O module

Table 17 shows the part number label location, part number, description, and whether it

is a FRU or CRU.

Part Number (P/N) Label

CNS-001700

Table 17 Two-port 10-Gb/s optical I/O module part number

Part number label

location

(Figure 22) Part number Description FRU CRU

303-081-103B or C Two-port 10-Gb/s optical I/O

module



Other manuals for EMC VNX Series

Questions and Answers:

Need help?

Do you have a question about the EMC VNX Series and is the answer not in the manual?

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)