EMC VNX Series Parts Location Guide

I/O modules
EMC VNX7500 Parts Location Guide 29
Two-port 10-Gb/s optical (w/iSCSI protocol) I/O module
Figure 24 shows the part number label location on the two-port 10-Gb/s optical (w/iSCSI
protocol) I/O module (labeled 10 GbE on the latch handle).
Figure 24 Example of the two-port 10-Gb/s optical (w/iSCSI protocol) I/O module
Table 19 shows the part number label location, part number, description, and whether it
is a FRU or CRU.
Part Number (P/N) Label
CNS-001700
Table 19 Two-port 10-Gb-s optical (w/iSCSI protocol) I/O module part number
Part number label
location
(Figure 24) Part number Description FRU CRU
303-081-105B Two-port 10-Gb/s optical (w/iSCSI
protocol) I/O module


EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)