To Next Page

To Previous Page

30 EMC VNX7500 Parts Location Guide

I/O modules

Four-port 6-Gb/s SAS I/O module

Figure 25 shows the part number label location on the four-port 6-Gb/s SAS I/O module

(labeled 6 Gb SAS v1 on the latch handle).

Figure 25 Example of the four-port 6-Gb/s SAS I/O module

Table 20 shows the part number label location, part number, description, and whether it

is a FRU or CRU.

0123

Part Number (P/N label

VNX-000617

Table 20 Four-port 6-Gb/s SAS I/O Module part numbers

Part number label

location

(Figure 25) Part number Description FRU CRU

303-163-100B Four-port 6-Gb/s SAS 

Other manuals for EMC VNX Series

Questions and Answers:

Need help?

Do you have a question about the EMC VNX Series and is the answer not in the manual?

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)