EMC VNX Series Parts Location Guide

32 EMC VNX7500 Parts Location Guide
I/O modules
Two-port 10-Gb/s optical I/O module
Figure 27 shows the part number label location on the two-port 10-Gb/s optical or active
Twinax I/O module (labeled 10 GbE iSCSI or 10 GbE v2 on the latch handle).
Figure 27 Example of the two-port optical I/O module
Table 22 shows the part number label location, part number, description, and whether it
is a FRU or CRU.
Part Number (P/N) Label
CNS-001700
Table 22 Two-port optical I/O module part number
Part number label
location
(Figure 27) Part number Description FRU CRU
303-081-103B or C Two-port 10-Gb/s optical I/O
module


EMC VNX Series Specifications

General

Management Interface	Unisphere
Drive Support	SAS, NL-SAS, Flash (SSD)
RAID Levels	RAID 0, 1, 3, 5, 6
Protocols Supported	Fibre Channel, iSCSI, NFS, CIFS
Data Services	Deduplication, Compression, Snapshots, Replication
Processor	Intel Xeon
Operating System	VNX Operating Environment (block), VNX File Operating Environment (file)