44 EMC VNX7500 Parts Location Guide
Disk-array enclosure (DAE)
3U, 15 (3.5-inch) disk drive DAE
Figure 36 shows the front view of the 3U, 15 (3.5-inch) disk drive DAE.
Note: You can visually distinguish disk module kinds by their type, capacity, and speed
labels, and by the design of the latch and handle on each disk module (Figure 36).
Figure 36 Example of the 3U, 15 (3.5-inch) disk drive DAE (front view)
Note: Figure 36 is for illustrative purposes only. The front of the disk modules may be a
little different than the ones in your particular cabinet.
Table 29 is an example of the parts available for the 3U, 15 (3.5-inch) disk drive DAE and
lists the part number label location, part number, description, and whether it is a FRU or
CRU.
Due to the extensive variety of disk module types, Table 29 only lists some of the disk
types. EMC recommends that you refer to the latest
EMC VNX5500, VNX5700, and
VNX7500 Series Storage Systems Disk and OE Matrix
Guide
to ensure that you have the
correct part for your configuration.
Part Number Label
VNX-000607
Table 29 3U, 15 (3.5-inch) DAE disk module part numbers
Part number label
location
(Figure 36) Part number Description (see note) FRU CRU
005049175 300 GB, 6 Gb/s SAS, 10k rpm
005049249 600 GB, 6 Gb/s SAS, 15k rpm
Note: The description field describes the disk module type, capacity, drive type, and spindle
speed (rpm).
To Next Page
Loading...
Need help?
General
