47
Reference Manual
00809-0200-4420, Rev HC
Section 5: Operation and Maintenance
July 2015
Operation and Maintenance
Parameter mapping
Register Mapping is the process of assigning data points from wireless field devices to
Ethernet/IP registers. These registers can then be read by a Ethernet/IP master or client.
Ethernet/IP register mapping can be found by navigating to System Settings>Protocols>
EtherNet/IP>EtherNet/IP Member Map.
Figure 5-8. Ethernet/IP Register Map Page
Table 5-4. Summary of Terms Used for the Ethernet/IP Mapping Page
Terms Description
Input Instance Ethernet/IP Input Static Assembly Instance - 496 bytes
Output Instance Ethernet/IP Output Static Assembly Instance - 496 bytes
Member Ethernet/IP Instance Member in which data will get produced or consumed
Point Name Assigned data point in the format HARTtag.parameter
New entry Creates a new entry in this table
<<First Navigates to the first page of this table
<<Previous Navigates to the previous page of this table
Search Finds the next occurrence of the characters entered into this field
Next>> Navigates to the next page of this table
Last>> Navigates to the last page of this table
To Next Page
Loading...
