Emerson AVENTICS - Spare parts and accessories

General data
Mounting orientation • Exhaust modules, pressure regulators,
throttle modules, and pneumatically op-
erated shutoff modules:
Any if used with dry and oil-free com-
pressed air
• See gFig.1
Table8: Standards and directives
Standards and directives complied with
DIN EN ISO4414 Pneumatic fluid power– General rules and safety requirements for
systems and their components
Further technical data can be found on the product page at the Emerson store.
11 Spare parts and accessories
Description Material number
Cover sticker (4x)
Prevents manipulation to the throttle modules.
The stickers can be placed over the adjustment screws to prevent
unauthorized changes. After positioning, the stickers cannot be re-
moved without destroying them.
R422003596
Cover plate (incl. screw, and 4 cover stickers)
Prevents manipulation to the throttle modules.
The cover plate can be fastened over the adjustment screw to pre-
vent unauthorized changes. The cover stickers can be used as addi-
tional protection.
R422003595
Stacking assembly kit
To stack two-channel pressure regulators.
R422103090
Mounting bracket kit
To fasten function modules to the mounting plate
R422103091
Additional information is available in the Emerson Store.
AVENTICS™ | R422003121-BAL-001-AE | English 19