Emerson Bettis 500 - Reload Factory Settings

Installation and Operation Manual
E2K-405-0218 Rev. 2 February 2018
71
Section 5: Customizing Actuator Settings
Customizing Actuator Settings
5.5.12 Reload Factory Settings
Factory default settings are detailed in Table 4-4. Factory settings do not overwrite
valve travel limits or analog calibration.
CAUTION:
CLEAR LOGS only clears the alarm log, torque profile, and resets the operation
log.
Figure 5-19 Bluetooth
NOTE:
Only 1 Bluetooth module can be enabled.
YES
YES
Save
Change
Settings?
NO
Figure 5-19 Bluetooth
BLUETOOTH
Go to Figure 5-4
Set Time & Date
Go to Figure 5-4
Save Change Settings
YES
BACK
NEXT
Increment choice:
<ENABLE or DISABLE>
NO NO NO NO NO
BACK
Go to Figure 5-4
Restore Factory Settings
NO
OR
NEXT
YES
LDM
Bluetooth
<Enable Disable>
YES YES YES
Increment choice:
<ENABLE or DISABLE>
RDM1
Bluetooth
<Enable Disable>
Increment choice:
<ENABLE or DISABLE>
RDM2
Bluetooth
<Enable Disable>
Increment choice:
<ENABLE or DISABLE>
BTDiscovery
<Enable Disable>
Increment choice:
<TAG or SERIAL>
Modied Variables
are saved to EEPROM
and Update Registry
Bluetooth
Name
<Tag Serial>