Emerson Mentor MP - Page 184

Parameter
description
protocol
Performance
Menu
14
14.14
14.18
Parameter
structure
Keypad and
format
Advanced parameter
descriptions
Serial comms
14.13
PID output
high limit
PID hold
integrator enable
14.17
14.10
PID proportional
gain
14.11
PID integral
gain
PID output
low limit
PID symmetrical
limits enable
PID controller
output
PID output
scale factor
14.01 14.15
+
+
PID output
destination
parameter*
14.16
Any
unprotected
variable
parameter
??.??
14.12
PID derivative
gain
??.??
Key
Input
terminals
Output
terminals
0.XX
0.XX
Read-write (RW)
parameter
Read-only (RO)
parameter
The parameters are all shown at their default settings
*The PID controller is only enabled if Pr 14.16 is set to a non Pr xx.00 and unprotected destination parameter.
Mentor MP Advanced User Guide 181
Issue Number: 4 www.onxcontrol.com