D Channel combinations
D.1 Rules for channel combinations
Use these rules to determine what channel types and channel combinations are valid on the transmitter.
Rule number Rule
1 Channel A is always 4-20mA HART (Loop Powered) Output 1.
2 Channel B can be 4-20mA Frequency Output 1 or Discrete Output 1.
D.2 Valid combinations for channel configuration
The following table shows all valid combinations for channel configuration. Depending on your purchase
order, some channels may not be activated on your device.
Combination Channel A Channel B
Combination 1 mA Output 1/HART Frequency Output 1
Combination 2 mA Output 1/HART Discrete Output 1
Combination 3 mA Output 1/HART mA Output 2
Configuration and Use Manual Channel combinations
MMI-20048166 April 2019
Configuration and Use Manual 217
To Next Page
Loading...
